| 1. | The use of conventional magnets for commercial fusion reactors is ruled out .
商业聚变反应堆上使用常规磁体已不予考虑。 |
| 2. | A new generation fusion reactor will be needed after that to prove the next step, ignition .
此后，将需要新一代的聚变反应堆对下一阶段，即“起爆”阶段进行试验。 |
| 3. | Lithium cooled fusion reactor blanket
锂冷却式聚变反应堆包层 |
| 4. | Laser ignited fusion reactor
激光引烧聚变反应堆 |
| 5. | Laser fusion reactor
激光聚变反应堆 |
| 6. | In the first half of his career at ornl , lue worked in various stages of research and development of superconducting magnets for fusion reactors
在橡树岭国家研究院的前半段时间里，吕锦文从事核融合反应炉所需的超导磁铁的研发。 |
| 7. | Abstract : a quantitative analysis for dynamic stability of a set of superconducting partial torus in a fusion reactor under a pulse current over a stationary current is given
文摘:对于聚变反应堆中超导载流磁体在稳态电流基础上受到脉冲电流影响时的动力稳定性给出了定量分析方法。 |
| 8. | Sic film was coated on the surface of 316l stainless steel by substrate bias - assisted radio frequency ( rf ) sputtering as tritium permeation barrier ( tpb ) of first wall and blanket in fusion reactor
采用分步偏压辅助射频( rf )溅射法在316l不锈钢表面制备了sic薄膜。扫描电镜( sem )观察表明膜致密、均匀、与基体结合牢固。 |
